Measuring method Dual slope integration mode
Measurement range AC20mA/200mA/2A/20A/200A/1000A/Auto
Accuracy 23℃±5℃ 80%RH or less (50/60Hz)
AC 20mA/0.01mA/±2.0% rdg ± 5 dgt
AC 200mA/0.1mA/±2.0% rdg ± 5 dgt
AC 2A/1mA/±2.0% rdg ± 5 dgt
AC 20A/10mA/±2.0% rdg ± 5 dgt
AC 200A/0.1A/±2.0% rdg ± 5 dgt
AC 1000A/1A/±2.0% rdg ± 5 dgt
Filter function Low pass filter : 150Hz
Max Memory function “Max” mark on LCD with maximum value
Auto power function “It power-off approximately 10-minutes after final operation.
This function will be disabled during MAX-hold/ Bluetooth is on.”
Over range indication Only the manual ranges are displayed up to 110% of the setting range (Excluding 1000A range). “OL” mark on LCD
Data hold indication “DH” mark on LCD with data hold value
Low battery indication “Battery” icon on LCD
Sampling 2 times/sec
Jaw opening capability 80mm x 74mm
Withstanding Voltage AC 3700V 1 minute max. (Between the core of CT and outer case)
Limitation of circuit voltage Less than AC 600V (EN61010 Installation category CAT III 300V)
Operating Temperature 0℃ to 50℃, 85%RH max. (Without condensation )
Storage Temperature -10℃ to 60℃, 80%RH max. (Without condensation )
Power supply 1.5V (AM-4, LR03 or AAA)×3
Size 138(W)×237(H)×46(D)mm
Weight Approx. 650g
Accessories Hard carrying case:1
Instruction manual:1
Interface Bluetooth 4.2